Multi-tech-systems MT5634ZPX Bedienungsanleitung PDF herunterladen (Seite 46)

MT5634ZPX

Owner’s Manual

S-Registers

S-registers generally affect how the AT commands perform. You

can read or alter the contents of an S-register by using the S

command (see “AT Commands”).

rings 0, 1–255 1 Sets the number of rings before

the modem answers.

ATS0=0

disables auto-answer completely.

rings 0–255 0 Counts the number of rings that

have occurred.

decimal 0–127 43 (+) Sets ASCII code for the escape

128–255 character. Values greater than

127 disable the escape sequence.

decimal 0–127 13 (^M) Sets ASCII code for the carriage

return character.

decimal 0–127 10 (^J) Sets ASCII code for the line feed

character.

decimal 0–32 8 (^H) Sets ASCII code for the backspace

33–127 character. Values greater than 32

disable the backspace character.

seconds 2–65* 2* Sets the time the modem will wait

after it goes off-hook before it be-

gins to dial the telephone number.

seconds 1–255* 50* Sets the time the modem will wait

for a carrier signal before aborting

a call. Also sets the wait for si-

lence time for the @ dial modifier.

seconds 0–65 2 Sets the length of a pause caused

by a comma character in a dialing

command.

S10

100 ms 1–254 20 Sets how long a carrier signal

must be lost before the modem

disconnects.

* These values may be different outside North America.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 87 88

Keine Kommentare

Multi-tech-systems MT5634ZPX Bedienungsanleitung Seite 46