Multi-tech-systems MT5634ZPW-PCI Bedienungsanleitung PDF herunterladen (Seite 30)

MT5634ZPW-PCI

Owner’s Manual

Loopback Testing

1. Connect a microphone and speaker to the MultiModemZPW-

PCI. To avoid feedback, make sure the microphone and

speaker are well separated; for best results, use a headphone

instead of a speaker (make sure volume is turned down).

2. Select

Start

Programs

Accessories

HyperTerminal

3. Double-click on the Multi-Tech BBS icon you created in

“Step 2: Call the Multi-Tech BBS.” HyperTerminal starts with

the Connect dialog box open.

4. Click Cancel in the Connect dialog box.

5. In the HyperTerminal terminal window, type AT&&S and

press ENTER. This command causes input from the

microphone to be looped back to the speaker.

6. Speak into the microphone; you should hear your voice on

the speaker or headphone.

7. Type ATZ and press ENTER to reset the modem.

MultiModemZPW-PCI’s Speakerphone Test

1. Connect a microphone and speaker to the MultiModemZPW-

PCI.

2. Select Start, Programs, Accessories, HyperTerminal.

3. Double-click on the Multi-Tech BBS icon you created in

“Step 2: Call the Multi-Tech BBS.” HyperTerminal starts with

the Connect dialog box open.

4. Click Cancel in the Connect dialog box.

5. In the HyperTerminal terminal window, type

AT+FCLASS=8

AT+VLS=7

ATDT

xxxxxxx

(dials the phone number

xxxxxxx

)

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 93 94

Keine Kommentare

Multi-tech-systems MT5634ZPW-PCI Bedienungsanleitung Seite 30