Multi-tech-systems MT2834BLR Bedienungsanleitung PDF herunterladen (Seite 18)

Chapter 2 - Installation

10. Error (ERR). When the ERR LED is flashing, the leased line is down

and the modem is in self-test mode has failed. When ERR LED is on,

this indicates the modem is in an out of service (OOS) state. When the

modem is out of service, it is busy to incoming calls.

NOTE: To verify Enhanced V.34 mode is engaged:

1. Type +++AT<CR> .

2. Type ATL8 .

3. The modem's current on-line condition is displayed. An

example of L8 listing is shown below.

Figure 2-2. On-Line Diagnostics

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 89 90

Keine Kommentare

Multi-tech-systems MT2834BLR Bedienungsanleitung Seite 18